Determination of sugars and cyclitols isolated from various morphological parts of Medicago sativa L

Plant research interest has increased all over the world, and a large body of evidence has been collected to show the huge potential of medicinal plants in various disease treatments. Medicago sativa L., known as alfalfa, is a rich source of biologically active components and secondary metabolites and was frequently used from the ancient times both as fodder crop and as a traditional medicine in the treatment of various diseases. Cyclitols, naturally occurring in this plant, have a particular interest for us due to their significant anti‐diabetic, antioxidant, anti‐inflammatory, and anti‐cancer properties. In the present study we revealed the isolation, the identification, and the quantification of some cyclitols and sugars extracted from different morphological parts of alfalfa plant. Soxhlet extraction and solid phase extraction were used as extraction and purification methods, while for the analyses derivatization followed by gas chromatography with mass spectrometry was involved. The obtained results showed significant differences in the quantities of cyclitols and sugars found in the investigated morphological parts, ranging between 0.02 and 13.86 mg/g of plant in case of cyclitols, and in the range of 0.09 and 40.09 mg/g of plant for sugars. However, roots have the richest part of cyclitols and sugars in contrast to the leaves.     

Self-assembly mechanism of PEG-b-PCL and PEG-b-PBO-b-PCL amphiphilic copolymer micelles in aqueous solution from coarse grain modeling

We followed the self-assembly of high-molecular weight MePEG- b -PCL (poly(methyl ethylene glycol)-block-poly(ε-caprolactone)) diblock and MePEG- b -PBO- b -PCL (poly(methyl ethylene glycol)-block-poly(1,2-butylene oxide)-block-poly(ε-caprolactone)) into micelles using molecular dynamics simulation with a coarse grain (CG) force field based on quantum mechanics (CGq FF). The triblock polymer included a short poly(1,2-butylene oxide) (PBO) at the hydrophilic-hydrophobic interface of these systems. Keeping the hydrophilic length fixed (MePEG₄₅), we considered 250 chains in which the hydrophobic length changed from PCL₄₄ or PBO₆- b -PCL₄₃ to PCL₆₂ or PBO₉- b -PCL₆₁. The polymers were solvated in explicit water for 2 μs of simulations at 310.15 K. We found that the longer diblock system undergoes a morphological transition from an intermediate rod-like micelle to a prolate-sphere, while the micelle formed from the longer triblock system is a stable rod-like micelle. The two shorter diblock and triblock systems show similar self-assembly processes, both resulting in slightly prolate-spheres. The dynamics of the self-assembly is quantified in terms of chain radius of gyration, shape anisotropy, and hydration of the micelle cores. The final micelle structures are analyzed in terms of the local density components. We conclude that the CG model accurately describes the molecular mechanisms of self-assembly and the equilibrium micellar structures of hydrophilic and hydrophobic chains, including the quantity of solvent trapped inside the micellar core.     

基于Ni-SnO2纳米颗粒的GS-PUF设计

气敏传感器具有气体识别、探测和监测等功能, 广泛应用于工业生产等领域, 但在泄漏预警时缺乏迅速识别和定位等功能. 本文基于传感器制备工艺偏差分析, 通过对传感器气敏机制的研究, 提出一种基于Ni-SnO2纳米颗粒的气敏传感器物理不可克隆函数(Gas Sensor-Physical Unclonable Function, GS-PUF)设计方案. 该方案利用掺杂Ni元素的方法, 结合静电喷雾沉积技术制备Ni-SnO2气敏传感器, 以获取更加稳定可靠的物理特征值, 然后采集气敏传感器对不同浓度下气体的响应数据, 最后利用随机阻值多位平衡算法比较不同组气敏传感器响应电信号值, 实现PUF数据输出. 制备每组样本可产生128位二进制数据的多组PUF样本, 进行对比实验. 结果表明, 所设计的GS-PUF具有气体泄漏源头识别定位的功能, 且随机性提升至99%, 唯一性达49.80%.     

Design of Functional Carbon Composite Materials for Energy Conversion and Storage

The carbon composite materials have been a research hotspot in the fields of catalysis, energy conversion and so on, because of their features of large structure and morphology variety, good chemical and electrochemical stability, and high electronic conductivity, large specific surface area and rich active sites. This paper summarizes some research progress of carbon composite materials, including assembly methodologies, their structure regulation, properties, and related applications. Moreover, the current challenges and the prospects of these materials are also discussed.     

Synthesis,crystal structure and conformational analysis of an unexpected [1,5]dithiocine product of aminopyridine and thiovanillin

The condensation reaction of 2‐mercapto‐3‐methoxybenzaldehyde with 3‐aminopyridine afforded an unexpected N‐alkylated [1,5]dithiocine instead of the N‐salicylideneaniline. The proposed mechanism for this condensation involves a strong intramolecular hydrogen bond between the thiol and the amine groups, leading to a second condensation. The corresponding product, i.e. 4,10‐dimethoxy‐13‐(pyridin‐3‐yl)‐6H,12H‐6,12‐epiminodibenzo[b,f][1,5]dithiocine methanol 0.463‐solvate, C₂₁H₁₈N₂O₂S₂·0.463CH₃OH, was characterized by single‐crystal X‐ray diffraction analysis. The supramolecular structure shows π–π stacking and S…S interactions in the crystal packing. Within the asymmetric unit, two geometries of the N atom are observed. Although a planar geometry should be expected, a pyramidal one is observed due to the crystal packing. The presence of the two geometries was further supported by density functional theory (DFT) calculations that show an electronic energy difference of less than 2 kJ mol^?1 between the two conformers.     

油-气-水三相流超声传感器持气率测量*

为探索油-气-水三相流持气率测量难题,该文开展了脉冲透射式超声传感器持气率测量动态实验研究。首先,利用超声传感器与光纤传感器组合,测取了油-气-水三相流中段塞流、混状流、泡状流的响应信号;其次,提取了超声脉冲信号的最大值序列来反映不同流型时超声传感器响应特性,同时,借助双头光纤传感器与相关测速法,计算得到了流体中气泡弦长序列;最后,结合流型与泡径信息,利用超声传感器测量了不同流型下持气率,并分析了不同流型持气率预测的误差来源,为其他油-气-水三相流持气率测量传感器设计提供了借鉴。     

Mass spectrometry imaging of latent fingerprints using titanium oxide development powder as an existing matrix

Recent research has focused on increasing the evidentiary value of latent fingerprints through chemical analysis. Although researchers have optimized the use of organic and metal matrices for matrix‐assisted laser desorption/ionization‐mass spectrometry imaging (MALDI‐MSI) of latent fingerprints, the use of development powders as matrices has not been fully investigated. Carbon forensic powder (CFP), a common nonporous development technique, was shown to be an efficient one‐step matrix; however, a high‐resolution mass spectrometer was required in the low mass range due to carbon clusters. Titanium oxide (TiO₂) is another commonly used development powder, especially for dark nonporous surfaces. Here, forensic TiO₂ powder is utilized as a single‐step development and matrix technique for chemical imaging of latent fingerprints without the requirement of a high‐resolution mass spectrometer. All studied compounds were successfully detected when TiO₂ was used as the matrix in positive mode, although, generally, the overall ion signals were lower than the previously studied CFP. TiO₂ provided quality mass spectrometry (MS) images of endogenous and exogenous latent fingerprint compounds. The subsequent addition of traditional matrices on top of the TiO₂ powder was ineffective for universal detection of latent fingerprint compounds. Forensic TiO₂ development powder works as an efficient single‐step development and matrix technique for MALDI‐MSI analysis of latent fingerprints in positive mode and does not require a high‐resolution mass spectrometer for analysis.     

Toward Uniform Optical Properties of Carbon Dots

Carbon dots possess versatile optical properties that have prompted their investigation in applications including photocatalysis, photovoltaics, imaging, and drug delivery, among others. However, the preparation of these nanodots is accompanied by the formation of fluorophores and intermediates, which can be difficult to separate. In the absence of thorough purification protocols, the reported optical properties are often heterogeneous, which hinders understanding of their physicochemical and optical properties and concrete application development. Here, two hydrophilic carbon dot systems starting with citric acid and diethylenetriamine are prepared. The impact of purification, including dialysis, ultrafiltration, and organic washes, on the properties of the dots is demonstrated. It is shown that monitoring the purification endpoint using near-infrared, fluorescence, and absorbance spectroscopies is possible. Moreover, it is demonstrated that fluorescence quantum yields can be a reliable tool to determine the purification endpoint. This work shows that even carbon dots derived from the same chemical precursors can have different purification profiles and purification requirements. However, the developed approach can be used to determine the proper purification procedure and endpoint for any carbon dot system regardless of the starting materials. Finally, it is envisioned that this work can be easily extended toward the purification of other hydrophilic nanomaterials.     

基于平面度的燃料电池电化学性能模拟

 固体氧化物燃料电池的翘曲会影响电极-盖板界面的接触情况，从而影响电化学性能，对相关制造工艺提出了很大的挑战．为了分析燃料电池平面度对放电过程的影响，揭示其潜在的风险，我们建立了两个基于有限元法的仿真模型，对考虑平面度缺陷的燃料电池封装和放电进行分析．在对固体氧化物燃料电池进行平面度测量的基础上，首先建立了具有真实燃料电池翘曲特性的几何模型，分析封装过程中接触压力的分布情况．然后将接触电阻的仿真结果导入到三维多物理场耦合模型中，模拟具有平面度缺陷的燃料电池电化学性能．计算结果展示了燃料电池两侧封装过程中接触压力的分布情况．通过对比有接触电阻和无接触电阻的燃料电池电流密度，分析了电池与盖板的接触对放电过程的影响．结果表明，燃料电池的凹陷面较难达到满意的接触状态，需要比凸起面更大的封装压力．燃料电池表面接触电阻的变化将引起电流传导路径的变化，产生局部高电流或低电流．这项工作强调了在燃料电池中保持均匀分布的接触电阻的重要性，为今后的优化工作奠定了基础．     

Acoustic scattering in a rarefied gas: Solving the R13 equations in spherical polar coordinates

In some circumstances, sound waves in a rarefied gas can be studied using a linearised form of the regularised 13-moment equations of Struchtrup and Torrilhon. We build solutions of those equations in spherical polar coordinates using vector spherical harmonics. We first solve a reduced system of equations (with 11 unknowns) after introduction of a force vector (divergence of the stress). We then show that the stresses themselves can be recovered by solving five additional equations. The results obtained are expected to be useful for problems such as acoustic scattering of a plane wave by a sphere in a rarefied gas.